ROGER ENGITECH FOR BIKE
|Key Features||Nano Ceramic Particles Fills The Scratches And Coats The Parts|
|Category||Feed it Well|
Engine Oil Additive, Ceramic Coating, To be Added Just By Removing Oil Cap, Nano Ceramic Particles Fills The Scratches And Coats The Parts, Lasts Upto 20000 Km, Concentrated, 4ml Quantity Injection
Do you want to- Reduce friction in reciprocating parts of two wheeler’s Engine? Genuinely wants to increase fuel average, pick-up and engine life of your two-wheeler? Wants to reduce Engine Noise of your two-wheeler?
If your answer is NO, then don’t read this further…
Engine Ceramic Coating for Bike
ROGER ENGITECH is Engine Ceramic Coating for Bike which Coats engine surfaces and Fills in the Microscopic Scratches of Reciprocating Parts. With this coating on the two-wheeler’s engine, efficiency and performance increases to higher extend.
Why Roger Engitech (Benefits):
In simple words as we know that BHP=IHP-FHP where IHP is Indicated Horse Power (the actual horse power developed by an engine), BHP is Brake Horse power (Available at flywheel) and FHP is Frictional Horse power (The Horse Power lost in overcoming the friction of reciprocating engine parts like Pistons, valves, camshaft, crankshaft etc.).
It’s a simple logic that to increase BHP in a given engine the FHP must be at its minimum and for that the reciprocating parts has to be as smooth as possible and without scratches. The ROGER ENGITECH coats the frictional surfaces and fills in the microscopic scratches on reciprocating and base parts and helps in reducing friction, which benefiting in increasing pickup, fuel average and engine life.
•Engine Ceramic Coating for Bike ROGER ENGITECH : A ceramic layer is formed due to combination and diffusion of Ceramic Nano particles with compounds of oil at high combustion and which also regenerates engine surfaces by restoring microscopic scratches of reciprocating parts like Piston, Ring, Cylinder, Valve, Valve Guide, Crankshaft thus reducing FHP & consequently increasing BHP.
•Increases Engine Compression Pressure and Overall Engine Dynamics: Reduces engine vibration and engine noise, Increases the power and mechanical efficiency of the engine and Decrease in noise level from the engine.
•Protection Against Corrosion and Aggressive Chemicals: Extends operating life of all working parts of engine and hence increases life and efficiency of engine.
•Increased Efficiency of the Lubrication System: Facilitates cold engine ignition and eliminates dry engine operation especially during winter time when temperature is extremely low.
•Decreased Exhaust Emission of Toxic Gases: Reduces exhaust smoke, CO and CH exhaust and enhances engine pickup and performance.
•Eco-friendly Without Any Adverse Effect: Doesn’t harm Environment and hence reduces pollution.
•Reduces Working Temperature of the Engine: Reduces oil overconsumption and Fuel consumption and hence increases two-wheeler mileage.
•Long Lasting: Effect of ROGER ENGITECH lasts up to 20000 kms even if engine oil is changed.
How It Works (Technicality) :
•This liquid creates layers of coating on worn-out parts like piston, ring, cylinder bore, valve, valve guides, crankshaft etc. and it reduces friction which results in increased pick up and average of the two-wheeler.
•The effect of this coating last for 20,000 kilometers, even though you change the engine oil in between, coating of ROGER ENGITECH remains intact.
•ROGER ENGITECH creates 20 nanometers coating on the engine parts at very high Combustion Temperatures Resulting in Reduced Tolerance and Filling up Microscopic Scratches, which results in reducing noise, reduces smoke and increases pick up and Average.
How to use this Product (Method):
•It is very easy to use ROGER ENGITECH. It does not require opening the engine and still reaches to the surface of all worn-out parts.
•This formula only uses the oil as a medium to get into the engine. It is very soon extracted back out of the oil on the engine wall.
•The liquid provided in the sachet of ROGER ENGITECH just mixed in your two-wheeler’s engine oil and it will start working.
•Even though you change the engine oil, this formula will remain on engine parts’ surfaces for 20,000 kilometers.
Thus, don’t wait for the next replacement cycle of two wheeler’s engine oil. Mix this super liquid in engine oil now and see the change in performance. It is worth using and value for money. Thousands of users worldwide have used it satisfactorily.
Drive Long and Drive Bindaas !!!
I have Buy Roger Engitech Engine Ceramic Coating for my Bullet of 1981 Model in Rebuilt Engine.
5 - 6 = ?